EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is usually a very successful photo voltaic controller suitable for off-grid photo voltaic systems. Depending on multiphase synchronous rectification technological know-how, it ensures optimized Vitality conversion and technique security for a wide array of photovoltaic (PV) purposes.
Vital Attributes from the EPEVER Tracer AN Series Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller technological innovation for remarkable photo voltaic Electricity harvesting. Vital options include:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Increased battery life.
LCD Display with genuine-time information monitoring.
Multiple Load Manage Modes such as manual and timer.
Detailed Digital Protections in opposition to overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Stage Guidebook to Establishing the EPEVER Tracer AN Series Controller
one. Unboxing and Making ready the Controller
Assure all parts are involved: Tracer AN unit, temperature sensor, conversation cables, and consumer manual.
Verify the product selection and voltage scores match your photo voltaic panel and battery specs.
2. Mounting the Charge Controller
Find a very well-ventilated, dry site near to the battery bank.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Charge Controller
Warning: Generally comply with appropriate safety protocols and make sure the process is driven off in advance of connecting parts.
Stage 1: Connect the battery terminals to the demand controller (constructive to good, negative to destructive).
Step two: Join the photo voltaic panel array towards the PV input terminals.
Step 3: Join the load terminals if utilizing a direct load connection.
Move 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Power over the controller by connecting the battery 1st.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, More info timer, light-weight Management.
5. Checking and Info Logging
The Tracer AN Series supports authentic-time monitoring utilizing the MT50 remote meter.
Details might be logged via the RS485 communication port making use of software which include Solar Station Computer system.
Remote checking is achievable with the EPEVER WiFi module.
six. Troubleshooting Typical Difficulties
Concern one: No Electricity Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Alter system parameters if needed.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT options within the menu.
Advantages of the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification technology assures:
Higher Effectiveness: Lessened Vitality losses all through conversion.
Enhanced Dependability: Secure efficiency less than variable loads.
Longer Battery Daily life: Consistent and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is an Extraordinary option for optimizing solar power era and increasing battery life. By adhering to the above mentioned setup guide, consumers can ensure greatest performance and system longevity.