EPEVER Photo voltaic Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER Photo voltaic Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Collection Solar Cost Controller is a hugely economical photo voltaic controller made for off-grid solar techniques. Dependant on multiphase synchronous rectification engineering, it ensures optimized Electrical power conversion and system balance for an array of photovoltaic (PV) applications.

Important Features of your EPEVER Tracer AN Series Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller know-how for top-quality photo voltaic Electrical power harvesting. Key features consist of:

Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for enhanced battery daily life.
Liquid crystal display Display screen with real-time information monitoring.
Multiple Load Control Modes including handbook and timer.
Extensive Digital Protections versus overcharging, more than-discharging, limited circuits, and reverse polarity.
Phase-by-Step Guide to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Assure all factors are included: Tracer AN device, temperature sensor, interaction cables, and user manual.
Verify the model quantity and voltage ratings match your solar panel and battery specs.
2. Mounting the Cost Controller
Decide on a very well-ventilated, dry locale near to the battery financial institution.
Safe the Tracer AN controller utilizing the presented mounting brackets.
Retain appropriate clearance for warmth dissipation.
three. Wiring the Solar Demand Controller
Warning: Always abide by proper security protocols and ensure the system is powered off right before connecting factors.

Step 1: Hook up the battery terminals to your demand controller (optimistic to favourable, destructive to destructive).
Move 2: Hook up the solar panel array on the PV input terminals.
Step 3: Hook up the load terminals if employing a immediate load link.
Action four: Double-Examine all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power around the controller by connecting the battery to start with.
Make use of the LCD display to navigate the options menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, mild control.
5. Checking and Knowledge Logging
The Tracer AN Series supports authentic-time monitoring using the MT50 remote meter.
Info can Read more be logged by using the RS485 communication port applying software program for example Solar Station Personal computer.
Remote checking is achievable with the EPEVER WiFi module.
six. Troubleshooting Frequent Challenges
Situation one: No Electricity Output

Examine battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Problem 2: About-Voltage Safety

Confirm the photo voltaic array’s voltage score.
Adjust process parameters if required.
Problem 3: No Battery Charging

Inspect PV wiring for continuity.
Affirm MPPT options while in the menu.
Benefits of the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification technologies ensures:

Higher Performance: Diminished Power losses all through conversion.
Improved Trustworthiness: Secure overall performance underneath variable hundreds.
For a longer time Battery Lifestyle: Regular and accurate charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technologies is undoubtedly an Remarkable choice for optimizing solar power technology and increasing battery lifetime. By subsequent the above mentioned setup tutorial, customers can make sure highest performance and program longevity.